Child Boards

No New Posts General

Installation, setup, compatibility, announcements, news about releases etc.

311 Posts
75 Topics

Last post by Roman Novgorodov
in Re: Exception when closi...
on February 03, 2019, 04:36:24 pm

No New Posts RS232 (serial) port

RS232, serial port, com port etc.

393 Posts
105 Topics

Last post by Roman Novgorodov
in Re: How to list all COM ...
on January 25, 2019, 04:19:07 am

No New Posts Data processing

Data processing, serial data transmission, data stream etc.

225 Posts
60 Topics

Last post by carsten
in Re: nrModbus TCP - HOW T...
on January 22, 2019, 12:05:47 pm

No New Posts Data modems (TAPI)

Telephone API support for data modems.

62 Posts
14 Topics

Last post by Roman Novgorodov
in Re: Zmodem CRC Error
on April 17, 2011, 04:20:05 pm

No New Posts Voice modems (TAPI)

Telephone API support for voice modems, Speech API etc.

25 Posts
9 Topics

Last post by Roman Novgorodov
in Re: TAPI on Windows 8 no...
on January 23, 2015, 12:31:14 pm

No New Posts Bluetooth (BT API)

33 Posts
14 Topics

Last post by mikerabat
in Re: Very slow Device sea...
on March 07, 2018, 08:07:03 am

No New Posts LPT port

LPT, parallel, printer port.

104 Posts
12 Topics

Last post by Fletch
in Sending data to Lpt port
on September 30, 2015, 07:59:18 am

No New Posts USB

338 Posts
70 Topics

Last post by cbugeiro
in Re: Fatal Error: 8, 3, U...
on May 18, 2018, 09:45:12 pm

No New Posts GSM/SMS

GSM devices, sms send/receive, phonebooks of GSM device etc.

549 Posts
138 Topics

Last post by Roman Novgorodov
in Re: How to read "UnRead"...
on July 06, 2018, 07:51:55 pm

No New Posts HID (Human Interface Device)

HID programming

246 Posts
66 Topics

Last post by mcullinan
in HID: hiddemo_64: 3DConne...
on June 04, 2018, 09:48:19 am

No New Posts GPS

Solutions for GPS - Global Positioning System

18 Posts
3 Topics

Last post by mrinkel
in Re: GNSS enabled devices
on January 26, 2018, 03:03:49 pm

No New Posts Socket

Network socket issues

7 Posts
5 Topics

Last post by ijbranch
in Can't tell if it is work...
on January 30, 2016, 12:18:02 am